What is TinyTrip?

TinyTrip runs on a Raspberry Pi 5. It listens to the music in the room with a USB microphone and shows visuals on a screen over HDMI. The visuals move with the music.

There is nothing to set up. You power it on, the visuals start, and it changes them on its own while the music plays. It can run like this for hours.

If the app crashes it starts again. If the microphone is unplugged the visuals keep running.

How it follows the music

TinyTrip checks the sound every 2.7 ms. It finds the kick, the hi-hat and the snare, and it also finds the tempo (BPM) and where the beat is. The visuals use all of this to move on the beat.

  1. Microphone Any USB microphone
  2. Listening Finds the drums, the tempo and the beat
  3. Choosing Picks the effect and when to change it
  4. Drawing Draws the effect on the GPU
  5. Screen HDMI, up to 1080p at 60 fps

When the kick is steady, TinyTrip knows when the next one will come, so it shows it on time and not a moment late.

The effect changes after some time, and also when the music builds up or drops. On a drop, the new effect starts on the first kick.

It is tuned on house, techno, trance and psytrance.

The effects

There are 16 effects and each one has 3 presets, so 48 looks in total. Each effect has its own controls. All of them have Punch, which sets how strong the hits look.

  1. 01Kaleido
  2. 02Tunnel
  3. 03Plasma
  4. 04Infinity
  5. 05Waves
  6. 06MilkDrop
  7. 07Geiss
  8. 08Hyperspace
  9. 09Ink Vortex
  10. 10Ferns
  11. 11Laser Cage
  12. 12Neon Drive
  13. 13Cymatics
  14. 14Living Coral
  15. 15Datamosh
  16. 16Liquid Chrome

How to use it

  1. Connect a screen to HDMI0 (the port next to USB-C).
  2. Plug in a USB microphone.
  3. Power the Pi. The visuals start in under 8 seconds.
  4. Play music.
Live control

TinyTrip has its own Wi-Fi network. Join TinyTrip from your phone with the password tinytrip, then open http://tinytrip. There you can see the BPM and the levels, choose the effect and the preset, and control when the effect changes.

No internet and no router needed.

Hardware

What you need
  • Computer: Raspberry Pi 5 (4 GB) with the official Active Cooler
  • Storage: microSD card (A2 class)
  • Screen: any HDMI screen (a 4K screen gets a 1080p signal)
  • Microphone: any USB microphone or USB audio interface (the reference microphone is the miniDSP UMIK-1)
  • Power: the official 27 W USB-C power supply, or a USB-C PD power bank

Download

SD card image for Raspberry Pi 5 with TinyTrip installed.

Coming soon

The image is not ready for download yet.

Project note

This is a hobby project I am building for my own use. It is still in development.