TinyTrip
v0.1.0Music-reactive visuals on a Raspberry Pi 5. Plug in a USB microphone and a screen: it boots in under 8 seconds and turns the music in the room into fullscreen visuals that land on the beat.
What is TinyTrip?
TinyTrip is a small, purpose-built Linux system for the Raspberry Pi 5. It listens to the room through a USB microphone and draws fullscreen visuals over HDMI that move with the music.
There is no desktop and nothing to operate. Power it on and it runs by itself for hours, changing scene on its own as the music builds and drops.
It also looks after itself: a crash restarts the app, a hang reboots the device, and if the microphone is unplugged the visuals keep moving.
How it follows the music
Levels and drum hits (kick, hi-hat, snare) are analysed every 2.7 ms. It also tracks the tempo and where in the beat the music is, so the motion lands on the beat you hear.
- Microphone Any USB mic or audio interface
- Analysis Levels, drums, tempo, beat
- Director Picks the scene, cuts on the beat
- Renderer Real-time shaders on the GPU
- Screen HDMI, up to 1080p at 60 fps
In steady four-on-the-floor the kick is shown on the predicted beat, not a moment later when it is detected. Scenes change on a timer and on builds and drops. On a drop, the new scene comes in on its first kick.
Tuned on house, techno, trance and psytrance.
The effects
Sixteen original effects, each with three presets: 48 looks in rotation. Every effect has its own controls, and all of them have Punch: how hard the hits land.
- 01Kaleido
- 02Tunnel
- 03Plasma
- 04Infinity
- 05Waves
- 06MilkDrop
- 07Geiss
- 08Hyperspace
- 09Ink Vortex
- 10Ferns
- 11Laser Cage
- 12Neon Drive
- 13Cymatics
- 14Living Coral
- 15Datamosh
- 16Liquid Chrome
How to use it
- Connect a screen to HDMI0 (the port nearest USB-C) and plug in a USB microphone.
- Power the Pi. The visuals start in under 8 seconds.
- Play music. TinyTrip adapts to the microphone by itself, with nothing to set up.
TinyTrip runs its own Wi-Fi network. Join TinyTrip from a phone and open http://tinytrip to see the BPM and levels, pick the effect and preset, and control the rotation.
It needs no internet connection and no router.
Hardware
- Computer: Raspberry Pi 5 (4 GB) with the official Active Cooler
- Storage: A2-class microSD card
- Screen: any HDMI display; 4K displays get a 1080p signal
- Sound in: any class-compliant USB microphone or audio interface (miniDSP UMIK-1 is the reference)
- Power: the official 27 W USB-C supply, or a USB-C PD power bank
TinyTrip is a hobby project I build for my own use. It is still in development and there is no public download yet.